Sku: {{details.product.ModelNumber}}

Amprobe SC-600 Signal Clamp

Quantity

Please fill out this field...

Please enter a number...

Please enter at least 1...

Please enter at max 999999...

You purchased this item on {{details.product.OrderHistory[0].OrderDate | date : 'yyyy-MM-dd'}}

Personal Greeting

Name

Subject

Message

In many situations, it is either not possible to gain access to a cable for making an electrical contact or it is not safe to do so. The SC-600 Signal Clamp accessory provides an efficient and safe method of applying a locate signal to a cable, enabling the UAT-600 Transmitter to induce a signal through the insulation into the wires or pipes. The clamp works on low impedance closed circuits only.

The SC-600 is included with the UAT-620 Underground Utilities Locator kit.

Provides an efficient and safe method of applying a locate signal to a cable
Enables the Transmitter to induce a signal through the insulation into wires or pipes
Works on low impedance closed circuits only

Specifications

Features	SC-600 Signal Clamp
Measurement category	CAT IV 600 V
Operating voltage/current	0 to 600 V, 100 A max.
Operating frequency/tracing modes	33 kHz and 8 kHz
Signal voltage output (nominal)	23 V rms at 8 kHz 30 V rms at 33 kHz
Operating temperature and humidity	-4 °F to 122 °F (-20 °C to 50 °C), ≤90% RH
Storage temperature and humidity	-40 °F to 140 °F (-40 °C to 60 °C), ≤90% RH
Operating altitude	< 6561 ft (< 2000 m)
Pollution degree	2
Water and dust resistance	IP54
Drop proof	3.28 ft (1 m)
Agency approval
Safety compliance	IEC 61010-1, IEC 61010-2-033 CSA/UL 61010-1, CSA/UL 61010-2-033
Size (H x W x L)	Approx. 11.6 x 7.1 x 1.4 in (295 x 180 x 37 mm)
Weight	Approx. 1.9 lb (0.85 kg)