{{image.AltTag}} {{image.AltTag}}
Default Image Default Image

{{details.product.ModelName}}

Sku: {{details.product.ModelNumber}}

Basic LTC tap position monitoring using the LTC’s slide wire position feedback device
{{details.product.PriceUnits}}
Please fill out this field...
Please enter a number...
Please enter at least 1...
Please enter at max 999999...

You purchased this item on {{details.product.OrderHistory[0].OrderDate | date : 'yyyy-MM-dd'}}

Personal Greeting

The 1511-LTC provides basic LTC tap position monitoring using the LTC’s slide wire position feedback device. As the LTC changes taps, the moveable contact picks up the voltage divided through the resistors in the slide wire, so that each tap has its own specific voltage.

SMART DISTRIBUTION TRANSFORMER MANAGEMENT

The range of INCON® Load Tap Changer (LTC) Position Monitors relay critical position information between the LTC and the LTC controller, enabling distribution transformers to run as efficiently as possible.

BALANCE LOADS

Ensure transformer loads are balanced.

REGULATE VOLTAGE

Regulate line voltage by adjusting feeder voltage.

REDUCE COSTS

Reduce power costs by providing minimum line voltage to the customer.

HIGHLIGHTS & TECHNOLOGY

Receives signal from a resistive drumswitch or “Slidewire” transmitter, 60 ohms min. total resistance

Provides a more reliable reading of the transmitter through software filtering and higher 24V signal strength

Optional RS-232 port

Optional High/Low limit relays function as programmable drag-hand contacts

Outputs interface to PLCs, SCADA RTUs and substation computers

MODEL COMPARISON

LTC MONITOR 1250B 1250-LTC 1511-LTC
Applications Transformer LTC Position, Hydro Dam Gate Position, Dam Head/Tail Water Level, Industrial Rotary Power Transformer LTC Position, LTC Position Data Collection Transformer LTC Position
Transducer Type Synchro (1292) Synchro (1292) Resistance Switch (Slidewire)
Input Signal 0-90 VAC, 50/60 Hz 0-90 VAC, 50/60 Hz 0-24 VDC

All Models

Resolution (1250B & 1250-LTC) ± 0.001% of full scale or 6 arc minutes
Accuracy +/-0.02% of full scale, maximum (0.01% typical)
Temperature Drift +/-0.01% per °C
Operating Temperature 0 ° to 55 °C
Humidity 10% - 90% non condensing
Weight 24 ounces
Tester Weight 2.6 lb (1 Kg)
Voltage 117 +/- 10%
Frequency 47 - 63 Hz
Load 8 Watts, maximum
Display Type 5-digit LED
Digit Height 0.56 inch (14.2 mm)
Viewing Distance 23 feet
Decimal Point (1250B) Field programmable
Optional Analog Outputs +/- 1 mA, 0-1 mA, 0-2 mA, 4-20 mA (requires 15 to 24 VDC external loop power)
Compliance 10 Volts (0-1 mA, ± 1mA, 0-2 mA)
500 Ohms (4-20 mA)
5 mA (0-10 VDC, ± 10 VDC) 1511-LTC
Resolution 12 bits (± 0.025% of full scale)
Optional Hi/Lo Relay Contact Rating 3A @ 125/250 VAC (resistive), 30 VDC
Communication Options RS-232 (ASCII)
RS-485 Full Duplex (MODBUS)

511-LTC PROGRAMMABLE POSITION MONITOR

The 1511-LTC provides basic LTC tap position monitoring using the LTC’s existing position feedback device.  Slidewire voltage measurements are filtered by firmware to give a stable, reliable tap position reading. Simple to install and easily calibrated to any LTC Slidewire.

BUILD A MODEL NUMBER

1511-LTC-U-W-Y

U = Output Options

0 =  0-1 Ma

1 =  ±1 mA

2 =  0-2 mA

4 =  4-20 mA

W = Control / Isolation

R =  Hi/Lo Relay Limits

I =  Input Isolation

Y = Comm. Options

S =  RS-232 Serial 

M =  RS-485 MODBUS

 

An adjustable 12 to 15 Volt DC regulated Power Supply that is used to provide loop power for INCON Panel Meters ordered with the 4 to 20 milliamp analog output option.

 

Model Description
1945 15 VDC Loop Power Supply (For 4-20 mA Analog Output)
  • This product is a Class 1 power supply and requires the chassis to be connected to earth ground at end application. Use 700 °C iron for soldering input connections. Tolerance for 230 VAC operations is +15% to -10%.

Highlights

  • VDE transformer construction (full rated to 50 °C)
  • + 0.05% regulation - Foldback/current limit
  • T.C. burned-in to MIL - 883 Lev. B
  • UL recognized/CSA certified
  • Chassis notched for AC input
  • 100/120/220/230-240 VAC power
  • Industry standard frame size

Applications

  • The 1945 power supply has inherently low conducted and radiated noise levels for most system applications that meet the requirements of FCC Docket 20780 for Class A equipment and VDE 0871 for Class A equipment without additional noise filtering.
  • Convection cooling is adequate where non-restricted airflow is available. When operating in a confined area, moving air or conduction cooling is recommended.
  • The five-wire input to the 1945 provides four voltage ranges: 100/ 120/220/230-240. Extended low line tolerance provides additional drop out margin in areas where line voltages are marginal. Inputs must be fused.

Safety

The 1945 power supply is designed to meet or exceed requirements of the following specifications: IEC 380, IEC 435, VDE 0730 Part 2, VDE 0804, ECMA-57, CEE 10 Part 2P, UL 1012, CSA 22.2 No. 143, CSA 22.2 No. 154. Specifically, field terminal to terminal spacing is 5.25 mm with 9.0 mm creepage to other metal. Leakage current is less than 5.0 mA and dielectric withstanding voltages are 3750 VAC input to chassis. 3750 VAC input to output and 300 VDC output to chassis.

Specifications

AC Input 100/120/220/230-240 VAC, ± 10%, 47-63 Hz (derate output current 10% for 50 Hz operation)
Fuse at 0.5 / 0.25 amps for 100 -120 / 220 - 240 VAC
DC Output 12 - 15 V (± 5%) Adjustable
Line Regulation ± 0.05% for a 10% line change
Load Regulation ± 0.05% for a 50% load change
Output Ripple 5.0 mV PK-PK maximum
Transient Response ≤ 50μs for a 50 to 100 % load change
Short Circuit and Overload Protection Automatic current limit / foldback
Over Voltage Protection Not Available
Remote Sensing Not Available
Stability ± 0.3% for 24 hour period after 1 hour warm-up
Temperature Rating 0 °C to 50 °C full-rated derated linearly to 40% at 70 °C
Temperature Coefficient ± 0.03%/°C maximum
Efficiency 55%
Vibration Per ML-STD-8100 method 514.3 category 1 procedure I
Shock Per ML-STD-8100 method 516.3 procedure III
Weight 2 lbs (1 kg)
Shipping Weight 3 lbs (1.5 kg)

 

STEP DOWN TRANSFORMER

The Model 1924-20VA is a Step-Down Transformer specifically chosen to power the INCON Programmable Position Monitor systems (Model 1250, 1292 and 1511) from 230/240VAC, 50/60Hz, as typically found in Europe and Asia.

Model Description
1924-20VA Step down transformer